Plate Slip-On Flanges (PL) DN40 Stainless 304

Specifications

Standard: GB/T 9119
SKU: PLF-000011
Nominal Diameter: DN40
Material: Stainless 304
Finish: Plain
Unit Weight: 2096.1 g/pc Geometry-based estimate, not an inspection weight, for quotation and freight planning
Type: Standard Part

Quantity (pcs)Request a Quote

Need another spec? Request a quote with your parameters →

Standard Basis

GB/T 9119

Common equivalents below; confirm dimensions and drawing before substitution.

Spec Range

DN40 · 同族 60 个规格

This SKU is sourced per order; other lengths/materials in this family below.

Material & Grade

Stainless 304

Surface & Finish

Plain

Plain / no coating: indoor dry environments

Standard Equivalents

Equivalence is based on published standard-family information (Identical = interchangeable; Equivalent = dimensions/tolerances may differ, verify drawings before substitution).

System	Standard	Equivalence	Note
GB	GB/T 9119-2010	Identical	Plate slip-on steel pipe flanges, PN series
GB	GB/T 9124.1-2019	Equivalent	2019 consolidated PN-series steel pipe flange standard; same dimensions
EN	EN 1092-1 Type 01	Equivalent	Same PN-series drilling and dimensions; weight table source
HG	HG/T 20592	Equivalent	Chemical-industry PN series PL type, same dimensions (alias only, not ingested)
DIN	DIN 2576	Equivalent	Legacy PN10 plate flange = EN 1092-1 Type 01 PN10, small-DN weight source

Need another standard? Custom quote to your drawing →

Where It Fits

Food / Light Chemical

304 (A2) general corrosion resistance, food equipment, indoor humidity, light chemical duty

Custom to Drawing

Lengths/materials/grades not listed can be manufactured to drawing or standard

FAQ

MOQ and lead time?

Sourced per order or made to drawing. MOQ and lead time are confirmed at quote time by quantity, material and finish. Other sizes in this family are listed above; unlisted specs can be sourced to your drawing.

Can material or grade be substituted?

Swapping grade/material changes strength and corrosion resistance (e.g. 8.8→10.9 raises strength, 304→316 raises chloride resistance), re-check design load and environment before substitution.

How do I choose the finish?

Plain / no coating: indoor dry environments. Other finishes (HDG, Dacromet, electro zinc) can be quoted on the same size.

Other Sizes in this Family

60 sizes total · current DN40

DN40 5 sizesOpen ▾

DN40

Carbon Steel · Plain