Our own factory, plus a partner ecosystem: catalogue sizes for standard parts, your drawing for custom parts.

Send your drawing or spec list →

Conditions first, then standard and material; which documents ship with your batch is written into the order before we quote.

Technical Library

Fastener Technical Library

Reference material written for engineers — standard coordinates, parameter tables, mechanisms and failure modes. Every claim is cited, so you can re-check the numbers yourself.

Thread Systems

Metric, Inch and Pipe Thread Systems: How They Differ
How metric, unified inch and pipe thread callouts differ in profile, tolerance class and gaging system, cited to the FED-STD-H28 sections consulted.

Mechanics & Strength

Property Classes 4.8–12.9: What the Numbers Mean
How a property class such as 8.8 or 10.9 encodes nominal tensile strength and yield ratio, with values cited to GB/T 3098.1-2010 Table 3.

Standards

Seismic Anchor Bolts for Post-Installed Bracing: Selection and Documents
How to choose post-installed anchors for seismic bracing: wedge versus chemical, the prohibited types, C1/C2 categories and the documents to ship.

Coatings & Corrosion

Fastener Coatings and Platings: Designation, Thickness and Durability Baselines
How electroplated, hot-dip galvanized, black oxide, phosphate and passivated fastener coatings are designated, with thickness and salt spray figures cited by standard.

This article helps with selection and application. But in real projects, specifying the right part is only step one, finding the right factory, controlling quality, and delivering on time is the real challenge. We cover fasteners, rubber, plastics, and industrial textiles across four categories, from Zhejiang industrial clusters to your project site, one team, end to end.

See Our Supply Chain Capabilities →