Engineering reference on fasteners and hardware, written by a team with manufacturing backgrounds.

About this site →

ENGINEERING TOOL

Hex Nut Weight Chart (M6–M36) — ISO 4032 / GB/T 6170-2015

Sizes (mm)m (mm)Unit weight (g)
±5%
kg per 1,000 pcs (approx.)
M61052.47 g2.467
M8136.55.29 g5.288
M101689.7 g9.702
M12181014.4 g14.4
M162414.837.4 g37.4
M20301663.2 g63.2

Unit weight and weight per 1,000 pcs for every metric hex nut size from M6 to M36, computed as geometric volume × density on carbon steel (width across flats per ISO 4032 / GB/T 6170-2015, nut height per the ISO 4032:1999-series library model) — same formula and parameters as the weight calculator and the per-size charts, with the basis fully disclosed right below the table and a ±5% estimate tolerance.

Full PDF

Download the full PDF (M6–M36, all sizes)

Printable chart covering every size in this family — enter your email to get it.

Full Size Table (M6–M36)

Click a size for its dedicated chart (material density conversion card and kg/1000 pcs ↔ lb/100 pcs toggle). s = width across flats, m = nut height, pitch = coarse thread.

Sizes (mm)m (mm)Pitch (mm)Unit weight (g)
±5%
kg per 1,000 pcs (approx.)
M610512.47 g2.467
M8136.51.255.29 g5.288
M101681.59.7 g9.702
M1218101.7514.4 g14.4
M142111221.5 g21.5
M162414.8237.4 g37.4
M1827152.548.4 g48.4
M2030162.563.2 g63.2
M2234182.593.7 g93.7
M2436193108 g108.1
M2741223163 g163.2
M3046243.5227 g227.1
M3350263.5285 g285.3
M3655294390 g389.7

Basis of Calculation & Disclosed Assumptions

Calculation basis

  • All values are computed as geometric volume × density (carbon steel 7.85 g/cm³, base metal, coating excluded) — identical formula and parameters as the online weight calculator and the per-size charts.
  • Hex nut = hexagonal prism (across flats s) minus the tapped hole, whose effective diameter is d − 0.5×pitch (the mean of thread major/minor diameters with face-chamfer allowance).
  • The basis is calibrated family-wide against public per-1,000-pcs weight tables.

Scope & limits

  • Theoretical geometric estimates for quotation, freight and packing budgets; use measured values for trade settlement.
  • Actual piece weight varies with thread tolerance, chamfer and coating (hot-dip galvanizing ≈ +4.5%); theoretical estimate tolerance ±5%.
  • Fine-thread nuts (ISO 8673 / GB/T 6171) share the same envelope, so this table approximates their unit weight.

Other materials, other sizes? Use the calculator

The weight calculator covers every hex nut size with stainless and brass density conversion — piece, batch and pieces-per-tonne results in one pass.

Open the weight calculator

Cite this chart

YAXIIO. Hex Nut Weight Chart (M6–M36) — ISO 4032 / GB/T 6170-2015. https://www.yaxiio.com/en/tools/hex-nut-weight-chart (accessed 2026-11-17).

Free to cite and embed — attribution required: “YAXIIO” + a link to this page.

FAQ

Are these weights the same as DIN 934 nuts?

Not exactly. Withdrawn DIN 934 specified a larger width across flats for three sizes — M10 (17 vs 16 mm), M12 (19 vs 18 mm) and M14 (22 vs 21 mm) — so DIN 934 nuts of those sizes are slightly heavier than the GB/T 6170 / ISO 4032 values in this table. All other sizes share the same across-flats, and the weights are practically identical. When sourcing spares for older European drawings, check which standard is specified first.

Does this table cover heavy hex nuts (ASTM A563 / GB/T 1231-2024)?

No. This table covers style-1 hex nuts (ISO 4032 / GB/T 6170). Heavy hex nuts — wider across flats and thicker, used in structural bolting assemblies (GB/T 1231-2024 system, or paired with ASTM A325/A490 bolts) — are a different, heavier series and their weights cannot be derived from this table.

How do I convert these carbon-steel weights to stainless or brass?

Scale by the density ratio against carbon steel at 7.85 g/cm³: stainless 304 ×1.010, stainless 316 ×1.017, brass ×1.083; hot-dip galvanizing adds about +4.5% on top. The per-size charts carry a full material density conversion card, and the calculator outputs other materials directly.

Related References

Disclaimer: this chart provides engineering estimates for selection, quotation and freight budgeting only; it is not a design basis or an acceptance standard.