ENGINEERING TOOL
M14 Anchor Bolt Weight Chart
Weight per piece (M14, kg/pc)
| Shank length L (mm) | Straight no add-on | J-Hook hook +84 mm (6d) | L-Bend leg +56 mm (4d) | With Plate plate 56×7 mm |
|---|---|---|---|---|
| 300 | 0.363 | 0.464 | 0.43 | 0.535 |
| 400 | 0.483 | 0.585 | 0.551 | 0.656 |
| 500 | 0.604 | 0.706 | 0.672 | 0.777 |
| 600 | 0.725 | 0.827 | 0.793 | 0.897 |
Per-piece weights of M14 anchor bolts in four configurations — straight, J-hook, L-bend and welded end plate — across the full length range (carbon steel, geometric-volume method), kg and lb, basis fully disclosed.
Full PDF
Download the full PDF (M6–M36, all sizes)
Printable chart covering every size in this family — enter your email to get it.
Other sizes
Weight per piece (M14, kg/pc)
| Shank length L (mm) | Straight no add-on | J-Hook hook +84 mm (6d) | L-Bend leg +56 mm (4d) | With Plate plate 56×7 mm |
|---|---|---|---|---|
| 100 | 0.121 | 0.222 | 0.189 | 0.293 |
| 150 | 0.181 | 0.283 | 0.249 | 0.354 |
| 200 | 0.242 | 0.343 | 0.309 | 0.414 |
| 250 | 0.302 | 0.404 | 0.37 | 0.474 |
| 300 | 0.363 | 0.464 | 0.43 | 0.535 |
| 400 | 0.483 | 0.585 | 0.551 | 0.656 |
| 500 | 0.604 | 0.706 | 0.672 | 0.777 |
| 600 | 0.725 | 0.827 | 0.793 | 0.897 |
| 800 | 0.967 | 1.07 | 1.03 | 1.14 |
| 1000 | 1.21 | 1.31 | 1.28 | 1.38 |
| 1200 | 1.45 | 1.55 | 1.52 | 1.62 |
| 1500 | 1.81 | 1.91 | 1.88 | 1.98 |
| 2000 | 2.42 | 2.52 | 2.48 | 2.59 |
Cell shows weight per piece (kg/pc, carbon steel 7.85 g/cm³). L = straight shank length (hook/leg/plate excluded); full nominal diameter along the whole shank (no thread reduction).
References
- GB/T 799-2020 — Anchor bolts (CN, official full text; common series — anchor bolts are often custom-designed per project drawing)
- GB/T 192-2003 — General purpose metric screw threads: basic profile (CN, official full text; ISO 68-1 equivalent)
- Metric thread basic profile (ISO 68-1)
- Dimensions cross-checked against industry fastener data libraries; densities are common industry values
Material Density Conversion
Values above are carbon steel (7.85 g/cm³); for other materials multiply by the density factor.
| Material | Density (g/cm³) | Factor |
|---|---|---|
| Carbon / Alloy Steel | 7.85 | ×1.000 |
| Stainless 304 | 7.93 | ×1.010 |
| Stainless 316 | 7.98 | ×1.017 |
| Brass | 8.5 | ×1.083 |
Basis of Calculation & Disclosed Assumptions
Calculation basis
- All values are computed size by size as geometric volume × density (carbon steel 7.85 g/cm³, base metal, coating excluded) — identical formula and parameters as the online weight calculator.
- Straight = cylinder π/4·d²·L; J-hook = shank + hook developed length 6d (GB/T 799 hooked-bolt basis, identical to the online calculator).
- L-bend = shank + leg 4d (explicit assumption — GB/T 799 has no L-type leg table); with-plate = shank + square plate a×a×t (a=4d, t=0.5d, explicit assumption, hole-free plate, weld and accessories excluded).
- The full nominal diameter is used along the shank with no thread reduction.
Scope & limits
- Theoretical geometric estimates for quotation, freight and lifting budgets; use measured values for trade settlement.
- Actual piece weight varies with the as-built configuration (hook/leg/plate per drawing) and coating (hot-dip galvanizing ≈ +4.5%); send drawings for non-standard configurations.
- Theoretical estimate tolerance ±5%.
Cite this chart
YAXIIO. M14 Anchor Bolt Weight Chart. https://www.yaxiio.com/en/tools/anchor-bolt-weight-chart/m14 (accessed 2026-10-29).
Free to cite and embed — attribution required: “YAXIIO” + a link to this page.
FAQ
What is the difference between J-hook and L-bend M14 anchor bolts?
In this chart only the developed add-on differs: J-hook at 6d (+84 mm, GB/T 799 hooked-bolt basis) versus an L-bend leg at 4d (+56 mm, explicit assumption). At L=500: J-hook ≈ 0.706 kg, L-bend ≈ 0.672 kg. Actual hook/leg dimensions follow the drawing.
Are anchor bolts, foundation bolts and J bolts the same thing?
They are names within one product family: "anchor bolt" and "foundation bolt" both denote bolts embedded in a concrete foundation; a "J bolt" is the pattern with a J-shaped hook at the embedded end (the J-Hook column of this chart, hook developed length 6d), while an "L bolt" carries an L-shaped leg (the L-Bend column). All four configurations here are computed geometrically at the M14 nominal diameter.
Next: work out your order, or pick the size by standard
Related References
Bolt Weight Calculator
Interactive version: anchor / chemical / expansion bolts at any length, with material and coating factors — this size is pre-filled.
M14 Hex Bolt Weight Chart
Per-piece and per-1,000-pcs weights for the same size, including matching nut and washer.
M14 Bolt Torque Chart
K-factor tightening torque by property class and friction state for the same size.
Disclaimer: This chart is an engineering estimation for selection, quotation and freight estimation only. It does not constitute design or acceptance criteria.