ENGINEERING TOOL
M14 Hex Bolt Weight Chart (in kg)
Weight Chart
| Length (mm) | Weight per piece (g) | Weight per 1,000 pcs (kg) |
|---|---|---|
| M14×40 | 64.8 | 64.8 |
| M14×45 | 70.9 | 70.9 |
| M14×50 | 76.9 | 76.9 |
| M14×60 | 89 | 89 |
| M14×70 | 101 | 101 |
Full metric length series for M14 hex bolts — weight per piece (g) and per 1,000 pcs (kg), carbon steel, ISO 4014 / GB/T 5782-2025 partially threaded basis.
Full PDF
Download the full PDF (M6–M36, all sizes)
Printable chart covering every size in this family — enter your email to get it.
Other sizes
Weight Chart
| Length (mm) | Weight per piece (g) | Weight per 1,000 pcs (kg) |
|---|---|---|
| M14×10 | 33.7 | 33.7 |
| M14×12 | 35.7 | 35.7 |
| M14×16 | 39.7 | 39.7 |
| M14×20 | 43.6 | 43.6 |
| M14×25 | 48.6 | 48.6 |
| M14×30 | 53.6 | 53.6 |
| M14×35 | 58.8 | 58.8 |
| M14×40 | 64.8 | 64.8 |
| M14×45 | 70.9 | 70.9 |
| M14×50 | 76.9 | 76.9 |
| M14×60 | 89 | 89 |
| M14×70 | 101 | 101 |
| M14×80 | 113 | 113 |
| M14×90 | 125 | 125 |
| M14×100 | 137 | 137 |
| M14×110 | 149 | 149 |
| M14×120 | 161 | 161 |
| M14×140 | 184 | 184 |
| M14×160 | 209 | 209 |
| M14×180 | 233 | 233 |
| M14×200 | 257 | 257 |
| M14×250 | 315 | 315 |
| M14×300 | 375 | 375 |
References
- GB/T 5782-2016 — Hex head bolts (CN national standard, official full text; aligns with ISO 4014 series)
- Hex head bolt dimensions (ISO 4014 series)
- GB/T 192-2003 — General purpose metric screw threads: basic profile (CN, official full text; ISO 68-1 equivalent)
- Metric thread basic profile (ISO 68-1)
- Dimensions cross-checked against industry fastener data libraries; densities are common industry values
Basis of Calculation
Carbon steel (density 7.85 g/cm³), GB/T 5782 partially threaded, coarse pitch, base-metal weight (coating excluded). Typical deviation within ±5% for standard parts; stainless 304/316 scale by density 7.93/7.98 (≈ +1.0%/+1.7%). Use measured values for trade settlement.
Matching Nut & Washer Weights
| Hex nut (ISO 4032 / GB/T 6170) M14 | 21.5 g per piece |
| Flat washer (ISO 7089 / GB/T 97.1) M14 | 8.62 g per piece |
Cite this chart
YAXIIO. M14 Hex Bolt Weight Chart (in kg). https://www.yaxiio.com/en/tools/bolt-weight-chart/m14 (accessed 2026-10-29).
Free to cite and embed — attribution required: “YAXIIO” + a link to this page.
FAQ
What nut fits an M14 bolt, and how much does it weigh?
A matching M14 hex nut (ISO 4032 / GB/T 6170) at about 21.5 g per piece; a flat washer (ISO 7089 / GB/T 97.1) runs about 8.62 g per piece.
How much heavier is an M14 bolt in 304/316 stainless, and how much does coating add?
Geometry is unchanged — only the density ratio applies: about ×1.010 for 304 and ×1.017 for 316. Coating is extra: hot-dip galvanizing typically adds 3–6%, electro zinc under 1%; chart weights are base metal without coating.
Next: work out your order, or pick the size by standard
Calculate my order
Total weight · Packing quantity · Freight estimate
Corresponding standard
DIN 933 / GB/T 5783-2025 / ISO 4017
Full size range · Per-size weight · How to choose material and grade — all on this standard page
Chart basis: GB/T 5782-2025 (partially threaded); this standard page covers GB/T 5783-2025 (fully threaded).
Related References
Bolt Torque Calculator
Tightening torque range and target preload by class and friction condition (K-factor method).
M14 Bolt Torque Chart
Same-size torque range and preload matrix by class × friction state, Nm↔ft-lb toggle, printable.
M14 Anchor Bolt Weight Chart
Same-size unit weight for straight / J-hook / L-bend / end-plate configurations by length.
Non-Standard Size? Estimate It with a CNC Quote
The sizes on this page follow the standard series. If a drawing calls for an intermediate diameter, a modified head, or a specified material grade, our CNC quote calculator prices blank weight, machining time and finishing line by line.
Disclaimer: This chart is an engineering estimation. Values are provided for selection, quotation and freight estimation only and do not constitute design or acceptance criteria.