ENGINEERING TOOL
M24 Flat & Spring Washer Weight & Dimensions Chart
Flat & Spring Washer Weight Tables (M6–M36)
| Size | OD D | Thickness t | Weight per piece (g) | Bulk weight (kg/1000 pcs) |
|---|---|---|---|---|
| M20 | 37 mm | 3 mm | 17.2 g | 17.2 kg/1000 pcs |
| M22 | 39 mm | 3 mm | 18.3 g | 18.3 kg/1000 pcs |
| M24 | 44 mm | 4 mm | 32.3 g | 32.3 kg/1000 pcs |
| M27 | 50 mm | 4 mm | 42.3 g | 42.3 kg/1000 pcs |
| M30 | 56 mm | 4 mm | 53.6 g | 53.6 kg/1000 pcs |
Unit weights of M24 flat washers (ISO 7089 / GB/T 97.1-2002) and spring lock washers (DIN 127 series, modeled dims) side by side, computed as geometric volume × density on carbon steel, with kg/1000 pcs ↔ lb/100 pcs toggle and OD/thickness dimensions — basis fully disclosed.
Full PDF
Download the full PDF (M6–M36, all sizes)
Printable chart covering every size in this family — enter your email to get it.
Other sizes
Flat & Spring Washer Weight Tables (M6–M36)
Flat Washers (ISO 7089 ≈ GB/T 97.1)
| Size | OD D | Thickness t | Weight per piece (g) | Bulk weight (kg/1000 pcs) |
|---|---|---|---|---|
| M6 | 12 mm | 1.6 mm | 1.02 g | 1.02 kg/1000 pcs |
| M8 | 16 mm | 1.6 mm | 1.83 g | 1.83 kg/1000 pcs |
| M10 | 20 mm | 2 mm | 3.57 g | 3.57 kg/1000 pcs |
| M12 | 24 mm | 2.5 mm | 6.27 g | 6.27 kg/1000 pcs |
| M14 | 28 mm | 2.5 mm | 8.62 g | 8.62 kg/1000 pcs |
| M16 | 30 mm | 3 mm | 11.3 g | 11.3 kg/1000 pcs |
| M18 | 34 mm | 3 mm | 14.7 g | 14.7 kg/1000 pcs |
| M20 | 37 mm | 3 mm | 17.2 g | 17.2 kg/1000 pcs |
| M22 | 39 mm | 3 mm | 18.3 g | 18.3 kg/1000 pcs |
| M24 | 44 mm | 4 mm | 32.3 g | 32.3 kg/1000 pcs |
| M27 | 50 mm | 4 mm | 42.3 g | 42.3 kg/1000 pcs |
| M30 | 56 mm | 4 mm | 53.6 g | 53.6 kg/1000 pcs |
| M33 | 60 mm | 5 mm | 75.3 g | 75.3 kg/1000 pcs |
| M36 | 66 mm | 5 mm | 92.1 g | 92.1 kg/1000 pcs |
Spring Lock Washers (DIN 127 series, modeled dims)
| Size | OD D | Thickness t | Weight per piece (g) | Bulk weight (kg/1000 pcs) |
|---|---|---|---|---|
| M6 | 11.8 mm | 1.6 mm | 0.85 g | 0.85 kg/1000 pcs |
| M8 | 14.8 mm | 2 mm | 1.59 g | 1.59 kg/1000 pcs |
| M10 | 18.1 mm | 2.2 mm | 2.56 g | 2.56 kg/1000 pcs |
| M12 | 21.1 mm | 2.5 mm | 3.85 g | 3.85 kg/1000 pcs |
| M14 | 24.1 mm | 3 mm | 5.91 g | 5.91 kg/1000 pcs |
| M16 | 27.4 mm | 3.5 mm | 8.86 g | 8.86 kg/1000 pcs |
| M18 | 30.4 mm | 3.5 mm | 10.7 g | 10.7 kg/1000 pcs |
| M20 | 33.5 mm | 4 mm | 14.8 g | 14.8 kg/1000 pcs |
| M22 | 35.5 mm | 4 mm | 15.9 g | 15.9 kg/1000 pcs |
| M24 | 39 mm | 5 mm | 24.2 g | 24.2 kg/1000 pcs |
| M27 | 44 mm | 5 mm | 30.9 g | 30.9 kg/1000 pcs |
| M30 | 49 mm | 6 mm | 46.1 g | 46.1 kg/1000 pcs |
| M33 | 53 mm | 6 mm | 52.8 g | 52.8 kg/1000 pcs |
| M36 | 57 mm | 6 mm | 60 g | 60 kg/1000 pcs |
References
- GB/T 97.1-2002 — Plain washers, product grade A (CN, official full text; aligns with ISO 7089/7090 series)
- Plain washer dimensions (ISO 7089/7090 series)
- GB/T 192-2003 — General purpose metric screw threads: basic profile (CN, official full text; ISO 68-1 equivalent)
- Metric thread basic profile (ISO 68-1)
- Dimensions cross-checked against industry fastener data libraries; densities are common industry values
Material Density Conversion
Values above are carbon steel (7.85 g/cm³); for other materials multiply by the density factor.
| Material | Density (g/cm³) | Factor |
|---|---|---|
| Carbon / Alloy Steel | 7.85 | ×1.000 |
| Stainless 304 | 7.93 | ×1.010 |
| Stainless 316 | 7.98 | ×1.017 |
| Brass | 8.5 | ×1.083 |
Basis of Calculation & Disclosed Assumptions
Calculation basis
- All values are computed as annular geometric volume × density (carbon steel 7.85 g/cm³, base metal, coating excluded) — identical formula and parameters as the online weight calculator and the catalog SKUs.
- Flat washers use π/4·(D²−d1²)·t with the bore at the DIN 125 A standard hole diameter d1 (e.g. M6→6.4 mm, M12→13 mm — slightly larger than the nominal diameter, so no separate ID column is shown), closing within ±0.3% of published DIN 125 per-1,000-pcs weights across all sizes.
- Spring lock washers use π/4·(D²−d²)·t (bore at the nominal diameter d) with an additional ×0.83 effective-section allowance for the split gap and section chamfers, regressed on published DIN 127 per-1,000-pcs weights.
- Flat washer dimensions follow ISO 7089 / GB/T 97.1 (equivalent adoption); spring lock washers use the library modelled DIN 127 series dimensions.
Scope & limits
- Theoretical geometric estimates for quotation, freight and packing budgets; use measured values for trade settlement.
- Actual piece weight varies with chamfer, split-ring geometry and coating (hot-dip galvanizing ≈ +4.5%).
- Theoretical estimate tolerance ±5%.
Cite this chart
YAXIIO. M24 Flat & Spring Washer Weight & Dimensions Chart. https://www.yaxiio.com/en/tools/flat-washer-weight-chart/m24 (accessed 2026-10-29).
Free to cite and embed — attribution required: “YAXIIO” + a link to this page.
FAQ
What is the difference between a spring washer and a flat washer?
Both are washers but serve different purposes: a spring washer (lock washer) resists loosening through its split-ring spring force, while a flat washer spreads bearing pressure and protects the mating surface. They are often paired — flat washer under a spring washer; the chart above lists both weights for each size side by side.
What washers pair with an M24 bolt?
A matching M24 flat washer (ISO 7089 / GB/T 97.1) plus a spring lock washer (GB/T 93) for anti-loosening; for the mating hex nut (ISO 4032 / GB/T 6170) see our hex nut weight chart for the same size.
Next: work out your order, or pick the size by standard
Related References
Bolt Weight Calculator
Interactive version: bolts, nuts, flat/spring washers and sets at any quantity, material and coating factors — this size is pre-filled.
M24 Hex Nut Weight Chart
Unit and per-1,000-pcs weights of the matching hex nut, with width across flats and height (GB/T 6170 basis).
M24 Hex Bolt Weight Chart
Per-piece and per-1,000-pcs weights across the full length series, including matching nut and washers.
Flat Washer Catalog
GB/T 97.1 flat washers: sizes, materials and coatings — quotation on request.
Spring Lock Washer Catalog
GB/T 93 spring lock washers: sizes, materials and coatings — quotation on request.
Disclaimer: This chart is an engineering estimation for selection, quotation and freight estimation only. It does not constitute design or acceptance criteria.