ENGINEERING TOOL
M24 Hex Bolt Weight Chart (in kg)
Weight Chart
| Length (mm) | Weight per piece (g) | Weight per 1,000 pcs (kg) |
|---|---|---|
| M24×40 | 239 | 239 |
| M24×45 | 254 | 254 |
| M24×50 | 269 | 269 |
| M24×60 | 302 | 302 |
| M24×70 | 338 | 338 |
Full metric length series for M24 hex bolts — weight per piece (g) and per 1,000 pcs (kg), carbon steel, ISO 4014 / GB/T 5782-2025 partially threaded basis.
Full PDF
Download the full PDF (M6–M36, all sizes)
Printable chart covering every size in this family — enter your email to get it.
Other sizes
Weight Chart
| Length (mm) | Weight per piece (g) | Weight per 1,000 pcs (kg) |
|---|---|---|
| M24×10 | 149 | 149 |
| M24×12 | 155 | 155 |
| M24×16 | 167 | 167 |
| M24×20 | 179 | 179 |
| M24×25 | 194 | 194 |
| M24×30 | 209 | 209 |
| M24×35 | 224 | 224 |
| M24×40 | 239 | 239 |
| M24×45 | 254 | 254 |
| M24×50 | 269 | 269 |
| M24×60 | 302 | 302 |
| M24×70 | 338 | 338 |
| M24×80 | 373 | 373 |
| M24×90 | 409 | 409 |
| M24×100 | 444 | 444 |
| M24×110 | 480 | 480 |
| M24×120 | 515 | 515 |
| M24×140 | 583 | 583 |
| M24×160 | 654 | 654 |
| M24×180 | 725 | 725 |
| M24×200 | 796 | 796 |
| M24×250 | 966 | 966 |
| M24×300 | 1,140 | 1,140 |
References
- GB/T 5782-2016 — Hex head bolts (CN national standard, official full text; aligns with ISO 4014 series)
- Hex head bolt dimensions (ISO 4014 series)
- GB/T 192-2003 — General purpose metric screw threads: basic profile (CN, official full text; ISO 68-1 equivalent)
- Metric thread basic profile (ISO 68-1)
- Dimensions cross-checked against industry fastener data libraries; densities are common industry values
Basis of Calculation
Carbon steel (density 7.85 g/cm³), GB/T 5782 partially threaded, coarse pitch, base-metal weight (coating excluded). Typical deviation within ±5% for standard parts; stainless 304/316 scale by density 7.93/7.98 (≈ +1.0%/+1.7%). Use measured values for trade settlement.
Matching Nut & Washer Weights
| Hex nut (ISO 4032 / GB/T 6170) M24 | 108 g per piece |
| Flat washer (ISO 7089 / GB/T 97.1) M24 | 32.3 g per piece |
Cite this chart
YAXIIO. M24 Hex Bolt Weight Chart (in kg). https://www.yaxiio.com/en/tools/bolt-weight-chart/m24 (accessed 2026-10-29).
Free to cite and embed — attribution required: “YAXIIO” + a link to this page.
FAQ
What nut fits an M24 bolt, and how much does it weigh?
A matching M24 hex nut (ISO 4032 / GB/T 6170) at about 108 g per piece; a flat washer (ISO 7089 / GB/T 97.1) runs about 32.3 g per piece.
How much heavier is an M24 bolt in 304/316 stainless, and how much does coating add?
Geometry is unchanged — only the density ratio applies: about ×1.010 for 304 and ×1.017 for 316. Coating is extra: hot-dip galvanizing typically adds 3–6%, electro zinc under 1%; chart weights are base metal without coating.
Next: work out your order, or pick the size by standard
Calculate my order
Total weight · Packing quantity · Freight estimate
Corresponding standard
DIN 933 / GB/T 5783-2025 / ISO 4017
Full size range · Per-size weight · How to choose material and grade — all on this standard page
Chart basis: GB/T 5782-2025 (partially threaded); this standard page covers GB/T 5783-2025 (fully threaded).
Related References
Bolt Torque Calculator
Tightening torque range and target preload by class and friction condition (K-factor method).
M24 Bolt Torque Chart
Same-size torque range and preload matrix by class × friction state, Nm↔ft-lb toggle, printable.
M24 Anchor Bolt Weight Chart
Same-size unit weight for straight / J-hook / L-bend / end-plate configurations by length.
Non-Standard Size? Estimate It with a CNC Quote
The sizes on this page follow the standard series. If a drawing calls for an intermediate diameter, a modified head, or a specified material grade, our CNC quote calculator prices blank weight, machining time and finishing line by line.
Disclaimer: This chart is an engineering estimation. Values are provided for selection, quotation and freight estimation only and do not constitute design or acceptance criteria.