Engineering Tools · Machine Screw Reference
M5 Screw Size Chart: Head Dimensions and Drive Size
M5 in every head type (mm)
One row per head type at the same thread size. dk and k are nominal (= max) values from the standard named in each row.
| Head type | Standard | Head dia. dk (mm) | Head height k (mm) | Coarse pitch P (mm) | Drive size |
|---|---|---|---|---|---|
| Slotted pan head (ISO 1580 / GB/T 67) | ISO 1580 / GB/T 67-2016 | 9.5 | 3 | 0.8 | Slot width n = 1.2 mm |
| Cross recessed pan head (ISO 7045 / GB/T 818) | ISO 7045 / GB/T 818-2016 | 9.5 | 3.7 | 0.8 | No.2 (PH2) |
| Cross recessed countersunk head 90° (ISO 7046-1 / GB/T 819.1) | ISO 7046-1 / GB/T 819.1-2016 | 9.3 | 2.7 | 0.8 | No.2 (PH2) |
| Cross recessed cheese head (ISO 7048 / GB/T 822) | ISO 7048 / GB/T 822-2016 | 8.5 | 3.3 | 0.8 | No.2 (PH2) |
| Socket head cap (ISO 4762 / GB/T 70.1) | ISO 4762 / GB/T 70.1-2008 | 8.5 | 5 | 0.8 | Hex socket s = 4 mm |
Head figures are the standard's nominal (= max) values. Head height depends on the head type, so an M5 screw is 3.7 mm high as a cross recessed pan head and 5.0 mm as a socket head cap. Tolerances, property classes and surface finish are agreed on order.
Full PDF
Download the full PDF (M1.6–M10, all sizes)
Printable chart covering every size in this family — enter your email to get it.
Other sizes
Machine screw size chart, M1.6–M10 (mm)
Pick a head type. dk is the head diameter and k the head height, both on the standard's nominal (= max) basis. "Recess No." is the cross recess size No.0 to No.4, which is the same as a PH0 to PH4 bit; a slotted head has a slot width n instead, and a socket head has a hexagon socket s.
Head type
Cross recessed pan head (ISO 7045 / GB/T 818) · ISO 7045 / GB/T 818-2016
| Size d (mm) | Coarse pitch P (mm) | Head dia. dk (mm) | Head height k (mm) | Recess No. |
|---|---|---|---|---|
| M1.6 | 0.35 | 3.2 | 1.3 | 0 |
| M2 | 0.4 | 4 | 1.6 | 0 |
| M2.5 | 0.45 | 5 | 2.1 | 1 |
| M3 | 0.5 | 5.6 | 2.4 | 1 |
| M4 | 0.7 | 8 | 3.1 | 2 |
| M5 | 0.8 | 9.5 | 3.7 | 2 |
| M6 | 1 | 12 | 4.6 | 3 |
| M8 | 1.25 | 16 | 6 | 4 |
| M10 | 1.5 | 20 | 7.5 | 4 |
The recess No. is the bit: No.0 to No.4 is a PH0 to PH4 bit. Recess numbering is per head type, so the same thread size can take a different recess number in two head types.
References
- GB/T 67-2016 Slotted pan head screws - table 1 (head diameter dk, head height k, slot width n)
- GB/T 818-2016 Cross recessed pan head screws - table 1 (dk, k, recess No.)
- GB/T 819.1-2016 Cross recessed countersunk head screws, part 1: class 4.8 - table 1 (dk, theoretical dk max, kc, recess No., 90° head)
- GB/T 822-2016 Cross recessed cheese head screws - table 1 (dk, k, recess No.; sizes M2.5 to M8)
- GB/T 70.1-2008 Socket head cap screws - table 1 (head diameter dk for the plain head, head height k, hexagon socket s)
- Table values are the nominal (= max) figures of the standard editions above, checked row by row against the official text. No table values are reproduced from third-party dimension tables, and each row is labelled with the standard it comes from.
M5 beside the next sizes
In this range the nominal diameter steps by 0.5 mm or 1 mm. Measure d across the thread with a caliper and compare with the rows below before ordering.
Left four columns: cross recessed pan head (ISO 7045 / GB/T 818). Right four columns: socket head cap (ISO 4762 / GB/T 70.1). Values in mm, nominal (= max).
| Size d (mm) | Coarse pitch P (mm) | Head dia. dk (mm) | Head height k (mm) | Recess No. | Head dia. dk (mm) | Head height k (mm) | Hex socket s (mm) |
|---|---|---|---|---|---|---|---|
| M4d = 4 | 0.7 | 8 | 3.1 | 2 | 7 | 4 | 3 |
| M5d = 5 | 0.8 | 9.5 | 3.7 | 2 | 8.5 | 5 | 4 |
| M6d = 6 | 1 | 12 | 4.6 | 3 | 10 | 6 | 5 |
Which dimension do you need? d, dk, k and the drive size
A machine screw carries four different numbers that all get called "the size". Buyers order by the first one and measure the others, which is where most wrong orders start.
d - nominal thread diameter
The number after M: M5 is d = 5 mm, a 5 mm thread. It is what the order is placed on, and it is not the head size.
P - pitch
Distance between two thread crests. M5 in the coarse series is 0.8 mm. Coarse pitch covers almost all machine screws; fine pitch is agreed on order against the drawing.
dk - head diameter
Outside diameter of the head, measured across it with a caliper. It sets the clearance hole and the counterbore: 9.5 mm for an M5 cross recessed pan head, 8.5 mm for an M5 cheese head, 9.3 mm for an M5 countersunk head.
k - head height
Height of the head above the bearing surface (on a countersunk head this is kc, the depth that has to be sunk). It sets counterbore depth and how far the head stands proud: 3.7 mm for an M5 pan head, 5 mm for an M5 socket head, 2.7 mm for an M5 countersunk head.
Drive size - recess No., slot width n or hexagon socket s
The recess that takes the tool: No.2 (PH2) at M5 in the cross recessed pan head series, slot width n = 1.2 mm at M5 in the slotted series, hexagon socket s = 4 mm at M5 for a socket head cap screw. Take the drive size from the head type, not from the thread size.
Metric to inch machine screw sizes (approximate, not interchangeable)
Cross-reference by nominal diameter only. The inch column is a straight millimetre-to-inch conversion of d; the last column is the inch machine screw whose nominal diameter is closest to it.
| Metric size | Nominal d (mm) | Nominal d (in) | Closest inch machine screw |
|---|---|---|---|
| M5 | 5 | 0.197 | #10 (4.826 mm) |
matched by nominal diameter only
Do not substitute. Metric and inch machine screws both use a 60° thread form, but the diameters and thread counts differ, so a near-diameter inch screw starts and then jams and damages the thread. Use these rows to read which callout a drawing means, not to interchange parts.
Cite this chart
YAXIIO. {size} Screw Size Chart: Head Dimensions and Drive Size. https://www.yaxiio.com/en/tools/screw-size-chart/m5 (accessed 2026-11-17).
Free to cite and embed — attribution required: “YAXIIO” + a link to this page.
FAQ
Is the M number the head size on an M5 machine screw?
No. The number after M is the nominal thread diameter d: an M5 screw is d = 5 mm across the thread, while the head is wider - dk = 9.5 mm on a cross recessed pan head and 8.5 mm on a socket head cap screw. Order by the M number, and confirm dk and k against the drawing or the counterbore.
Countersunk or pan head M5 - which do I need?
Countersunk sits flush and needs a machined 90° seat: the M5 countersunk head is dk = 9.3 mm, with a theoretical dk max of 10.4 mm for the seat and kc = 2.7 mm of head to sink. Pan head sits on the surface and needs no seat: the M5 pan head is dk = 9.5 mm and stands k = 3.7 mm proud. Use countersunk where the head must not protrude, and pan head where a bearing surface or easy removal matters.
Can I replace an M5 metric screw with an inch screw?
No, not as a substitute. The M5 thread is d = 5 mm with a 0.8 mm pitch, and the nearest inch machine screw only matches the diameter to within a few tenths of a millimetre while carrying a different thread count - so it will not run true in the same nut or tapped hole and will damage it. Both series are 60° threads, so the two look close on a drawing; cross-reference them to read callouts, and order the thread the joint is made for.
Next: work out your order, or pick the size by standard
Related References
Hex Key Size Chart
Socket head cap screws the other way round: the hexagon socket s of each size and the matching key arm lengths, M3-M24.
US Machine Screw Size Chart
The other track: machine screws sized the US way — size numbers #0 to #12 and fractional sizes 1/4 in to 1/2 in, with their UNC and UNF thread counts and the metric size nearest each one.
Bolt Weight Calculator
Unit weight and order total weight once the size and length are known - machine screws, bolts, nuts, washers and threaded rod, metric and inch.
Cross Recessed Pan Head Machine Screws (GB/T 818-2016)
Sizes, property classes and finishes we quote to GB/T 818, with the technical package for that standard.
Cross Recessed Countersunk Machine Screws (GB/T 819.1-2016)
The 90° countersunk machine screw range quoted to GB/T 819.1, class 4.8, with the technical package for that standard.
Socket Head Cap Screws (ISO 4762 / DIN 912 / GB/T 70.1-2008)
Socket head cap screws to ISO 4762 / DIN 912 / GB/T 70.1 — the same form in all three — with class and finish options.
Machine Screw Category
Head types and standard numbers in the catalog; sizes and lengths made to drawing.
Tap Drill Chart for M5 Threads
The hole to bore before tapping the same M5 thread, with the rule value d − P and the nearest drill in the metric set.
Non-Standard Size? Estimate It with a CNC Quote
The sizes on this page follow the standard series. If a drawing calls for an intermediate diameter, a modified head, or a specified material grade, our CNC quote calculator prices blank weight, machining time and finishing line by line.
Disclaimer: this table is a selection and quotation reference built from the standard editions named on this page, not a design basis or an acceptance standard.