ENGINEERING TOOL
Anchor Bolt Weight Chart — M6 to M36 by Configuration and Length
Family index of the anchor bolt weight charts: for every size from M6 to M36 the table gives the nominal diameter d, the configuration add-ons (J-hook tail 6d, L-bend leg 4d, end plate a×t) and the unit weight of a 500 mm J-hook bolt in carbon steel at 7.85 g/cm³. Values come from the same engine as the per-size pages; each size opens its own page with the full configuration × length matrix.
Full PDF
Download the full PDF (M6–M36, all sizes)
Printable chart covering every size in this family — enter your email to get it.
Size Index (M6–M36)
Click a size for its own page (four configurations × thirteen lengths from 100 mm to 2,000 mm, material density factors, coating note). d = nominal thread diameter; hook = 6d, leg = 4d, plate = 4d × 0.5d; the weight column is one 500 mm J-hook bolt in carbon steel, coating excluded.
| Size | d (mm) | J-hook tail 6d (mm) | L-bend leg 4d (mm) | End plate a×t (mm) | Weight @500 mm J-hook (kg/pc) | kg / 1,000 pcs |
|---|---|---|---|---|---|---|
| M6 | 6 | 36 | 24 | 24×3 | 0.119 | 119 |
| M8 | 8 | 48 | 32 | 32×4 | 0.216 | 216.2 |
| M10 | 10 | 60 | 40 | 40×5 | 0.345 | 345.3 |
| M12 | 12 | 72 | 48 | 48×6 | 0.508 | 507.8 |
| M14 | 14 | 84 | 56 | 56×7 | 0.706 | 705.7 |
| M16 | 16 | 96 | 64 | 64×8 | 0.941 | 940.7 |
| M18 | 18 | 108 | 72 | 72×9 | 1.215 | 1214.5 |
| M20 | 20 | 120 | 80 | 80×10 | 1.529 | 1529 |
| M22 | 22 | 132 | 88 | 88×11 | 1.886 | 1885.9 |
| M24 | 24 | 144 | 96 | 96×12 | 2.287 | 2287 |
| M27 | 27 | 162 | 108 | 108×13.5 | 2.975 | 2975.4 |
| M30 | 30 | 180 | 120 | 120×15 | 3.773 | 3773.2 |
| M33 | 33 | 198 | 132 | 132×16.5 | 4.686 | 4686.4 |
| M36 | 36 | 216 | 144 | 144×18 | 5.721 | 5721.1 |
Basis & Disclosed Assumptions
Where the numbers come from
- Every weight is a geometry × density figure from the same engine the product catalog and the per-size pages use: shank, hook or leg extension and end plate are added as separate geometry and then multiplied by 7.85 g/cm³ for carbon steel, coating excluded.
- Configuration add-ons are the family basis: J-hook tail 6d and L-bend leg 4d, end plate 4d × 0.5d. The plate is a parametric assumption disclosed on the per-size pages rather than a fixed table of plate sizes.
- Hot-dip galvanizing adds about +4.5% to the steel weight through the zinc layer, so a galvanized bolt ships slightly heavier than the figure here. The estimate tolerance used for this family is ±5%.
Scope & limits
- Anchor bolts are made to the project drawing rather than off a single size table: length, bend radius, leg length and plate size are normally specified per project. Treat this table as a weight estimate for ordering and freight, not as a dimensional specification.
- The per-size pages carry lengths from 100 mm to 2,000 mm. The index column above uses the 500 mm reference length; with the hook and plate fixed, weight rises roughly in proportion to length.
- Coating is not in the base figure. Density factors for 304 / 316 stainless and for brass are listed on each size page, and a material other than carbon steel scales the weight by its density factor.
References
- GB/T 799-2020 — Anchor bolts (CN, official full text; common series — anchor bolts are often custom-designed per project drawing)
- GB/T 192-2003 — General purpose metric screw threads: basic profile (CN, official full text; ISO 68-1 equivalent)
- Metric thread basic profile (ISO 68-1)
- Dimensions cross-checked against industry fastener data libraries; densities are common industry values
Need a length or a configuration outside the table?
The weight calculator covers anchor bolts: choose size, length, configuration and material and get the unit weight, the batch weight and pieces per tonne — on the same engine as this table.
Open the weight calculatorCite this chart
YAXIIO. Anchor Bolt Weight Chart — M6 to M36 by Configuration and Length. https://www.yaxiio.com/en/tools/anchor-bolt-weight-chart (accessed 2026-11-17).
Free to cite and embed — attribution required: “YAXIIO” + a link to this page.
FAQ
Do these weights include the hook, the bend and the end plate?
Yes. Each figure is the full fabricated shape — shank plus J-hook tail of 6d, L-bend leg of 4d or end plate of 4d × 0.5d — computed as geometry × density at 7.85 g/cm³ for carbon steel, coating excluded. A hot-dip galvanized bolt weighs about +4.5% more because of the zinc layer.
Why is the index table anchored at 500 mm when the length series runs from 100 to 2000 mm?
500 mm is the reference embedded length for this family — the value the per-size pages put at the top. The full series from 100 mm to 2000 mm is on each size page, computed with the same engine; with the hook and plate fixed, weight rises roughly in proportion to length.
Next: work out your order, or pick the size by standard
Related References
Bolt Weight Calculator
Size, length, configuration and material in one pass, with pieces per tonne; the same engine as this table.
Hex Head Bolt Weight Chart
The other weight family: grams per piece and kg per 1,000 pcs for hex head bolts M6–M36 across the full length series.
Bolt Torque Chart
The tightening side: torque by property class and friction state for M6–M36.
Anchor Bolt Product Catalog
GB/T 799 hooked bolts and drawing-based anchor bolts — request a quote by size, length and coating.
Seismic Anchor Bolts for Post-Installed Bracing: Selection and Documents
Which post-installed anchor families are accepted in the concrete tension zone, the coefficients that apply, and the documents required for Central Asia and Vietnam.
Disclaimer: this chart provides engineering reference data for selection and quotation only; it is not a design basis or an acceptance standard.